Includes: Set of new Rear Wheels for your Stewart X-Series, Q-Series or F1 Lithium Remote Controlled golf cart. If you have an X3R or older, please refer to the bottom of this page regarding a conversion kit.

Stewart Golf engineers worked in conjunction with specialist manufacturer Hedgehog to create wheels that would both reduce the weight and further improve the performance of X5/X7, X9R/X9F, Q-Series and F1 Lithium trolleys.

The weight of the V3 rear wheel set has reduced dramatically by 30% from the previous model. This reduces the energy required to accelerate the wheel, and also the energy required to drive the trolley once in motion. The effect of this is a reduction in battery consumption which ultimately leads to more holes per charge.

Combine these efficiency gains with the greater traction & stability generated by the flatter profile, lateral tread design and tire material, and the V3 wheels represent a significant leap forward in performance.

The quick release mechanism allows 'one handed' removal, with just one moving part. The front wheels are designed to match the rears, made from a material which slides laterally over the grass when you steer your X Series trolley.

Are the wheels easy to fit?
Rear wheels can be fitted easily using the quick release mechanism. The front wheels require a Torx / Allen Key and a pair of circlip pliers. The V3 wheels can not be fitted to the X1.

If you have the X3R or older, please contact us as you mayrequire a conversion kit to fit the new V3 wheels.

The conversion kit
The conversion kit consists of replacement drive dogs for the rear wheels of the unit. Exisiting X3R trolleys come with a 2 tang drive dog which is not strong enough to support the motion of the new wheels. These will need to be replaced with the 4 tang drive dogs which will hold the wheels firmly in place. Please see the video below for instructions on how to remove your wheels.